墙壁铰链（垂直）GT WGS 48 壁装接头，带垂直出口 铸铝，带内部钢管和滑动轴承 装置可旋转 250° ### RK Equipment Carrier System Range of Rose & Krieger equipment carrier components to support, contain, and protect control and communication cables. Based on a standardised round steel tube 48mm in diameter, the different system elements can be combined so as to allow individual system structure to be set up within a short time The steel tube is available in three different lengths for cutting to shorter length if required Attachment to the system elements is made with self-tapping Allen screws A free cable passage 40mm in diameter is provided Protection | IP 54 according to DIN 40050 (foot stand IP 42) ---|--- Torque of tube clamp | 30Nm Free cable passage | Through fittings and tube 40 mm in diameter Tube 48mm diameter | Inner galvanised steel tube, OD 48 mm x 4 mm wall thickness, DIN2393 Fitting body | Cast aluminium Finish | Powder-coat finish to RAL 7043, transport grey

法兰联轴器 GT KUF 48 铸铝，带内部钢管 大表面法兰固定在外壳上 260° 摆动无限调整 ### RK Equipment Carrier System Range of Rose & Krieger equipment carrier components to support, contain, and protect control and communication cables. Based on a standardised round steel tube 48mm in diameter, the different system elements can be combined so as to allow individual system structure to be set up within a short time The steel tube is available in three different lengths for cutting to shorter length if required Attachment to the system elements is made with self-tapping Allen screws A free cable passage 40mm in diameter is provided Protection | IP 54 according to DIN 40050 (foot stand IP 42) ---|--- Torque of tube clamp | 30Nm Free cable passage | Through fittings and tube 40 mm in diameter Tube 48mm diameter | Inner galvanised steel tube, OD 48 mm x 4 mm wall thickness, DIN2393 Fitting body | Cast aluminium Finish | Powder-coat finish to RAL 7043, transport grey

支脚支架枢轴 GT FD 48 表面安装，直向出口，带枢轴 铸铝，带内部钢管和滑动轴承 装置可旋转 250° ### RK Equipment Carrier System Range of Rose & Krieger equipment carrier components to support, contain, and protect control and communication cables. Based on a standardised round steel tube 48mm in diameter, the different system elements can be combined so as to allow individual system structure to be set up within a short time The steel tube is available in three different lengths for cutting to shorter length if required Attachment to the system elements is made with self-tapping Allen screws A free cable passage 40mm in diameter is provided Protection | IP 54 according to DIN 40050 (foot stand IP 42) ---|--- Torque of tube clamp | 30Nm Free cable passage | Through fittings and tube 40 mm in diameter Tube 48mm diameter | Inner galvanised steel tube, OD 48 mm x 4 mm wall thickness, DIN2393 Fitting body | Cast aluminium Finish | Powder-coat finish to RAL 7043, transport grey

GP 型（不带锯齿） 相同尺寸的两根圆管的 90° 到 270° 无限定位 尺寸 (mm) --- | GP 25 | GP 30 | GP 40 | GP 50 A | 25.1 | 30.1 | 40.15 | 50.2 B | 25.1 | 30.1 | 40.15 | 50.2 C | 45 | 45 | 60 | 70 D | 40 | 40 | 56 | 66 E | 40 | 40 | 56 | 66 H | 73 | 73 | 100 | 115 L | 146 | 146 | 200 | 230 M | 73 | 73 | 100 | 115 P | 33 | 33 | 48 | 58 S | M8x35 | M8x35 | M10x50 | M10x60 T | M8x35 | M8x35 | M10x50 | M10x60 ### Joint Clamps

Joint clamp GFZ With toothing, 180° swivel range, latchable every 15° ### Joint Clamps

类型 KVR 90° 连接方形管，用于线性装置 尺寸 (mm) --- | A | B | C | M | V 1 | V 2 KVR 40 | 40 | 117 | 60 | 47 | M10x50 | M8x45 ### Guide Elements - RK Tubular Linear Units & Accessories ### Guide Elements All these elements are: Clamped by screws Fitted with guide bush Fixed by screw attachment to linear unit drive nut

FV 型 以 90° 将方管连接到表面 半可拆卸 尺寸 (mm) --- | FV 30 | FV 40 A | 30.3 | 40.4 B | 6.5 | 8.5 C | 62 | 75 D | 45 | 60 E | 45 | 60 F | 5 | 5 G | 75 | 100 H | 57 | 76 K | 57 | 76 L | 56 | 73 M | 75 | 100 N | 10 | 12 P | 33.5 | 43 R | 25 | 25 R | 46 | 57 S | M8x45 | M8x60 ### Base Clamps

FK 型 将圆管并行连接到表面 尺寸 (mm) --- | FK 12 | FK 18 | FK 25 | FK 30 | FK 40 | FK 50 A | 12 | 18 | 25.1 | 30.1 | 40.15 | 50.2 B | 5.3 | 5.3 | 6.5 | 6.5 | 8.5 | 10.5 C | 18 | 18 | 30 | 30 | 42 | 50 D | 25 | 25 | 40 | 40 | 56 | 66 E | 25 | 25 | 40 | 40 | 60 | 65 G | 35 | 35 | 55 | 55 | 78 | 92 H | 38 | 38 | 53 | 53 | 82 | 98 K | 32 | 32 | 52 | 52 | 71 | 83 L | 38 | 38 | 60 | 60 | 83 | 96 M | 50 | 50 | 78 | 78 | 108 | 128 N | 5 | 5 | 7 | 7 | 10 | 14 O* | n/a | n/a | n/a | n/a | 52 | 62 P | 23.5 | 23.5 | 33 | 33 | 48 | 58 S | M6x25 | M6x25 | M8x35 | M8x35 | M10x50 | M10x60 ### 注 * FK12 到 FK30 具有两个中央位置孔，因此尺寸 O 不适用。 ### Flanged Clamps

W 型 连接 90° 相交的相同尺寸的两根圆管 尺寸 (mm) --- | W 12 | W 18 | W 25 | W 30 | W 40 | W 50 A | 12 | 18 | 25.1 | 30.1 | 40.15 | 50.2 B | 12 | 18 | 25.1 | 30.1 | 40.15 | 50.2 C | 25 | 25 | 35 | 35 | 55 | 65 D | 25 | 25 | 40 | 40 | 56 | 66 E | 25 | 25 | 45 | 45 | 60 | 70 G | n/a | n/a | 40 | 40 | 56 | 66 K | 52 | 52 | 80 | 80 | 117 | 136 L | 58 | 58 | 90 | 90 | 129 | 148 M | 39 | 39 | 60 | 60 | 88 | 103 P | 23.5 | 23.5 | 33 | 33 | 48 | 58 R | 43.5 | 43.5 | 71 | 71 | 99 | 115 S | M6x25 | M6x25 | M8x35 | M8x35 | M10x50 | M10x60 ### Angle Clamps (RK Tubular Alu. Connection Sys.)

KD 型 连接不同尺寸的两根圆管，转线90° 尺寸 (mm) --- | KD 25x18 | KD 40x30 | KD 50x30 A | 38 | 30.1 | 30.1 B | 25.1 | 40.15 | 50.2 C | 27 | 45 | 45 D | 40 | 65 | 65 E | 33 | 65 | 65 G | 40 | 66 | 66 H | 26 | 48 | 48 K | 60 | 102 | 102 L | 84 | 126 | 126 P | 26 | 43 | 43 Q | 33 | 58 | 58 R | 66 | 102 | 102 S | M8x30 | M10x45 | M10x45 T | M8x35 | M10x60 | M10x60 ### Cross Clamps

Cross clamp KD For pipes with different diameters

K 型 连接相同尺寸的两个圆管，转线 90° 尺寸 (mm) --- | K12 | K18 | K25 | K30 | K40 | K50 A | 12 | 18 | 25.1 | 30.1 | 40.15 | 50.2 B | 12 | 18 | 25.1 | 30.1 | 40.15 | 50.2 C | 20 | 20 | 33 | 33 | 45 | 53 D | 25 | 25 | 40 | 40 | 60 | 65 E | 25 | 25 | 40 | 40 | 60 | 65 G | n/a | n/a | 40 | 40 | 56 | 66 H | n/a | n/a | 40 | 40 | 56 | 66 K | 45 | 45 | 73 | 73 | 101 | 119 L | 61 | 61 | 93 | 93 | 125 | 143 P | 23.5 | 23.5 | 33 | 33 | 60 | 58 R | 46 | 46 | 77 | 77 | 101 | 120 S | M6x25 | M6x25 | M8x35 | M8x35 | M10x50 | M10x60 ### Cross Clamps

45° 和 90° 的双轴组件 组合板可容纳用于固定附件的钻孔模板，包括连接器块套件和固定设备 板和带由本色阳极氧化铝制成 ### Rose & Krieger

KI 40 在两面连接四根管 ### Handrail & Barrier Components

ANGLE CLAMP FIT 1.25" RD TUBE AL

ANGLE CLAMP FIT 2.00" RD TUBE AL

ANGLE CLAMP FIT 1.00" RD TUBE AL

CLAMPWORKS, THROUGH HOLE CLAMP

CLAMPWORKS, THROUGH HOLE CLAMP

CLAMPWORKS, THROUGH HOLE CLAMP

CLAMPWORKS, THROUGH HOLE CLAMP

CLAMPWORKS, DUAL TUBE HINGE CLAM

CLAMPWORKS, DUAL TUBE HINGE CLAM

定位滑座 铝制导轨挤压型槽和滑座 高导向精度 游标微调按钮 使用螺纹轴时的定位精度达 ±0.1mm 自锁螺纹轴 所有尺寸可以轻松组合，和/或借助可选附件与相邻较小或较大的定位滑座组合 负载数据 --- **滑座宽度 (mm)** | **Fx (N)** | **Fy (N)** | **Fz (N)** | **Mx (Nm)** | **My (Nm)** | **Mz (Nm)** | **Ly (Cm4)** | **Lz (Cm4)** 30 | 50 | 160 | 160 | 3 | 3 | 3 | 0.09 | 0.9 50 | 125 | 350 | 350 | 6 | 7.5 | 7.5 | 0.46 | 7.44 80 | 215 | 600 | 600 | 12 | 18 | 18 | 3.68 | 47.14 120 | 215 | 1150 | 1150 | 32 | 59 | 59 | 9.85 | 214.5 尺寸 (mm) --- **宽度** | **F** | **G** | **M1** | **M2** | **M3** | **Q** | **R** 30 | 4.8 | M3 | 11.6 | 5.8 | 17.1 | 16 | 7 50 | 8 | M4 | 22 | 10 | 26.5 | 21.5 | 10 80 | 11 | M5 | 40 | 16 | 40 | 34 | 12 120 | 15 | M6 | 61 | 23 | 60 | 44 | 12 ### Rose & Krieger

法兰夹 FK 尺寸 (mm) --- 类型 | FK12 | FK14 | FK16 | FK18 | FK20 A | 12 | 14 | 16 | 18 | 20 B | 5.3 | 5.3 | 5.3 | 5.3 | 6.5 C | 18 | 18 | 18 | 18 | 30 D | 25 | 25 | 25 | 25 | 40 E | 25 | 25 | 25 | 25 | 40 G | 35 | 35 | 35 | 35 | 55 H | 38 | 38 | 38 | 38 | 53 K | 32 | 32 | 32 | 32 | 52 L | 38 | 38 | 38 | 38 | 60 M | 50 | 50 | 50 | 50 | 78 N | 5 | 5 | 5 | 5 | 7 O | - | - | - | - | - P | 23.5 | 23.5 | 23.5 | 23.5 | 33 NOC | M 6 x 25 | M 6 x 25 | M 6 x 25 | M 6 x 25 | M 8 x 35 m (g) | 61 | 58 | 55 | 51 | 198 类型 | FK25 | FK30 | FK40 | FK50 ---|---|---|---|--- A | 25.1 | 30.1 | 40.15 | 50.2 B | 6.5 | 6.5 | 8.5 | 10.5 C | 30 | 30 | 42 | 50 D | 40 | 40 | 56 | 66 E | 40 | 40 | 60 | 65 G | 55 | 55 | 78 | 92 H | 53 | 53 | 82 | 98 K | 52 | 52 | 71 | 83 L | 60 | 60 | 83 | 96 M | 78 | 78 | 108 | 128 N | 7 | 7 | 10 | 14 O* | - | - | 52 | 62 P | 33 | 33 | 48 | 58 NOC | M 8 x 35 | M 8 x 35 | M 10 x 50 | M 10 x 60 m (g) | 184 | 157 | 470 | 700

F-40X80/3 40X80MM "3 SLOT" EXTRU

黑色聚乙烯管道封头 圆形或方形 ### Tube and Tube Stops

FI 40 BASE MOUNT